# Databricks bets H100s fix tabular AI cost _Databricks offers H100s for tabular models to 1M rows, but size, license and missing cost data decide use._ **Published:** 2026-11-16 **Source:** https://www.startuphub.ai/ai-news/artificial-intelligence/2026/databricks-bets-h100s-fix-tabular-ai-cost --- [Databricks](/startups/databricks) puts [AI Runtime](https://www.databricks.com/blog/tabular-foundation-models-databricks-ai-runtime) forward as managed H100 capacity for tabular foundation models at up to 1M rows by 200 features, per Databricks. The spread is stark: TabICLv2 runs about 28M parameters under BSD 3-Clause while TabFM lists about 400M under a non-commercial license, per [Databricks](/startups/databricks). KumoTabular at about 215M parameters and Mitra v2 at about 77M both claim commercially permissive terms, unlike TabPFNv3.5 at about 220M, per [Databricks](https://www.startuphub.ai/startups/databricks). TabICL compresses each row to four tokens so test rows attend only to training rows, a design TabFM and KumoTabular extend, while DeepLearning AI notes LLMs are not built for tabular prediction and teaches TFMs as the in-context alternative. Databricks says GPU inference costs more per prediction than XGBoost on CPU but publishes no latency, memory or dollar figures, per Databricks. Published cost per 100,000 predictions would change the read, so will buyers pay H100 rates for faster experiments when XGBoost still runs cheap on CPUs? --- Original analysis from [startuphub.ai](https://www.startuphub.ai), the #1 AI startup directory. © StartupHub.ai. All rights reserved. You may not republish this article in full without a license. Search engines and AI research tools may crawl and summarize for reference. Bulk reproduction or model training on this content requires a license. See https://www.startuphub.ai/terms.